May 28, 2005
To cut the metal, I'll use this
Makita Disk Grinder with a thin
metal cutting disk installed.
Now I'll slide the drives in from
the front to see what metal needs
to be removed.
This lip needs to be removed, but
the grinder can only reach so far.
The rest has to be done by
hand with a hacksaw.
Almost finished. A little more needs
to be removed in the lower left corner.
I'm waiting for some parts to arrive,
and there isn't much to do till then.
Back to the Index Page
Forward to May 29, 2005
Copyright © 1996-2006 - Al Anger All Rights Reserved Worldwide